Every piano page in Piano Price Point has a button marked More Information which details sales features. Interpreting the Data is a guide to help broaden your knowledge and understanding of what manufacturers are selling as benefits of their pianos. For the purpose of organization, the piano components have been divided into 6 major sections. There are many overlaps in relation to sound and function but for simplicity sake, they are as follows:
- Vertical Slide 1
Piano hammers strike the strings like mallets. Each of the 88 notes has a different sized hammer corresponding to each key. Larger ones are used to excite larger strings (lower notes) and are located on the left side of the keyboard while smaller ones strike thinner strings (high notes) at the right side of the piano. Hammers are made from sheep’s wool and there are many grades and kinds of wool. Hammer heads are pictured to the right. The red colored “underfelt” simply adds height to the felt to meet the piano makers’ requirements for dimensions. The color is insignificant except that it traditionally is a signature of either maker or brand. The molding is the wooden center part that the felt is wrapped around. It is usually made from mahogany, walnut or hornbeam. The handle part of the mallet is called the shank (pictured below). Piano hammers are attached to a jointed piece along a common rail called the action rail and pivot rotationally towards the strings. You can read 2 articles on piano felt from Jack Brand (Brand Felt makers of Weickert felt) and Abel for more information on the making of hammers. They are the 2 most prominent makers of hammer felt in the world.
- Vertical Slide 2
The hammer gives much of the tonal quality to the piano. The elasticity, length of fibers and processing of the hammer felt determines brilliance level, volume level and body. Better quality felt allows for more expressive nature when playing the piano. And while there are many factors that affect piano tone, the versatility that comes with top quality felt facilitates beautiful quiet felty tones and bold louder tones. Premium felt can more easily respond to various dynamic levels of playing.
Altering the tone of the piano is called voicing. The hammers can be manipulated to produce different sound. See this article here on voicing the piano.
Independent hammer name brands:
German: Renner, Abel, FFW, VFG, Weikert, Bacon, Wurzen
Other: Royal George (Originally UK… now?)
There are two types of strings on any piano. The treble plain steel wire makes up approximately the top 2/3 of the piano strings while the bass strings comprise the lowest 1/3 of the piano. Each note in the treble has three strings (tri-chord) while the bass has a mix of 2 strings (bi-chord) or 1 string per note (mono-chord). Bass strings are made from wrapping copper wire around a core of steel. Without question the most popular high grade plain wire comes from Röslau, Germany. Regarding bass strings however, there are several independent makers and many of the manufacturers wrap their own bass strings. There are also independent companies that manufacture custom sets of bass strings. The scale or design of strings - the length, thickness and tension are critical elements in what is perceived as the voice or signature from each manufacturer.
Independent piano wire names:
German: Röslau steel, Degen copper, Adolf
If you’ve ever played guitar, you’ll be aware of the importance of the bridge. The bridge is the transfer point of vibration from the strings to the soundboard. Why is this considered a sound producing element? In my mind I think of the bridge as not so much creating tone but as having the ability to drastically alter sound. If the transfer of vibration is inhibited, the overall piano tone can be dull, “thunky” or choked. Due to the nature and shape of piano bridges, some believe that it is cost prohibitive to build them out of one piece. Also, because there are approximately 18 tons of string tension on any piano, most makers have reinforced the bridges with a cross laminated piece called a cap. In more recent years, manufacturers have made vertically laminated bridges which in a sense act like sound ‘tubes’ transferring the sound through strips of wood. Still others make horizontally laminated bridges like layers. The term “cantilevered” refers to bridges that are shaped in such a way as to optimize placement and pressure on the soundboard. Often layers are added or areas are cut away so that the contact area is optimized on the soundboard. Hand-notched bridges refer to the point where the string is terminated at the bridge pins. In order to vibrate freely, accuracy in the bridge notch is of extreme importance. Traditionally bridges are made from beech or maple. Some makers also incorporate mahogany and even ebony. Most bridges are made in the factory and there are no associated independent name brands for bridges.
The soundboard on a piano is the large sheet of wood which acts as a transducer transforming vibration into sound. The purpose of a soundboard is to make audible the signal created by the hammers striking the strings, transferred through the bridges. The soundboard is put under compression (not tension) and creates what is called ‘crown’, a slightly arced shape. Without question, the most talked about area and quite often the difference in cost between models has to do with the soundboard of a piano. Piano makers are offering solid versus laminated soundboards. Please note that there are many different terms being associated with laminated soundboards (such as triphonic, meniscus, surface-tension or veneered). For the purpose of clarity, if a piano soundboard has more than one layer, I have called it laminated because that is what it is: 2 or more layers glued together to produce one soundboard.
Among elite piano makers is the pursuit of clear, tight grained woods. Due to a shortage of slow growth timber, makers now are advertising high altitude or mountain spruce soundboards. The reasoning is this: higher altitude makes for colder, slower growth and thus tighter grain. Tighter grain is considered more resonant. Logging at high altitude however is costly and dangerous. Countries are often associated as well with types of wood (Austrian, Italian, Siberian, Bavarian and Canadian). The most common wood for soundboards is spruce and most companies manufacture in-house.
Independent soundboard makers:
- Ribs & Rim
Ribs are attached to the under side of the soundboard and act as support for the crown. They also transfer tone perpendicular to the soundboard grain and secure the joints of the soundboard. The rim is the perimeter frame to the soundboard. Piano makers quite often advertise amount of ribs and whether they are notched to the inner rim denoting structural and acoustic cohesion. Philosophy on rim construction and materials vary greatly from maker to maker. Some have one continuous rim while others build it in pieces. The construction and components are company decisions and diversity in design varies from piano to piano. These parts are made in-house and there are no independent makers of rims and ribs advertised by manufacturers. There are instances however where piano makers will purchase ‘strung backs’ for uprights which include soundboard, frame, strings, and rim.
- Iron harp or plate
Consider that the modern piano has between 17 and 25 tons of string tension depending on the maker. The piano then needs to have a structure to support such tension. It is necessary to incorporate a framework to create not only tuning stability but also a rigid rim to the diaphragm of the soundboard.
The iron plate is often the gold colored piece located on the inside of the piano. There are mainly two streams of thinking regarding the iron frame: sand cast or V-pro. Sand cast refers to the age old method of placing the mold into wet sand and then pouring molten iron into the hollowed space. V-Pro refers to Vacuum Process which sucks the iron into precision molds and requires very little if any finishing. Traditional sand cast is somewhat laborious to finish. Some manufacturers have taken the tack of sand casting with CNC finishing (Computer Numerically Controlled a.k.a. computerized lathe). Decisions regarding casting are philosophical but are also driven by economics. V-Pro is very costly to set up and prohibits boutique piano makers from involvement in that process. Though some would argue that the casting and cooling methods are superior from one method to another, iron is relatively inert and musical contributions are negligible to the sound of the piano. Its primary purposes are rigidity and stiffness. Albeit more obscure but still noteworthy is the introduction to steel by some makers into mainstream manufacturing having a higher tensile strength than iron. Most iron plates are cast either in-house or purchased between piano makers.
- Frame and Keybed
Keybed: The keybed refers to the frame beneath the piano keys. Piano manufacturing requires not only stability but also accuracy as it relates to the keybed. If the keybed is not ‘true’, that means then that the action parts that are supported by the keybed will also be out of alignment. Subsequently for structural integrity, some manufacturers advertise a laminated keybed or a butcher block style keybed. Most often they are made from spruce or beech wood. Some manufacturers have also reinforced the keybed with a steel frame.
Frame: The frame of the piano aids the cast iron plate in structural integrity. Underneath a grand piano you will see beams. On the back of an upright piano these beams are referred to as back posts. Generally speaking, more beams equates to greater strength, stability and soundboard crown retention. Configuration and greater number of beams are considered sales advantages and part of each company’s manufacturing design. Some manufacturers have also incorporated steel to aid structural integrity into the framework.
- Tuning Pins & Pinblock
Tuning pins: The tuning pins on any piano are made from steel. They are a structural element in so far as the pins hold the string tension in place without which the piano would not be able to be tuned. Fine thread is cut on the tuning pins and they are usually reverse threaded so as to not come undone under pressure. Plating of pins (either in nickel, chrome or ‘blue’) prevent rust.
Independent tuning pin makers:
Pinblock or Wrestplank: The tuning pins fit into holes precisely drilled into a plank called the pinblock or wrestplank (“wrest” similar to “wrench” means to turn, thus the wrestplank is the block of wood where one would wrest the tuning pins). Modern piano makers all agree that multi-laminate layers make for the best pinblocks. What differentiates them is the amount of layers. Some have 7 laminations while others have 19 however more is not necessarily better. They are usually made from a dense wood such as maple or beech. It is located under the gold cast iron plate and usually hidden from plain view. Many pinblocks are made in the factory.
Independent pinblock makers:
- Mechanical: Action
The action of a piano is the mechanical system of levers that transfer the touch of a piano key to the strike of the hammer towards the string. In order to create sufficient power at the piano, each action has an “action ratio” that in effect multiplies the force of the key to the hammers. If each note requires upwards of 60 parts multiplied by 88 notes on the piano, each piano action then contains about 5,000 parts. What is referred to as the ‘touch’ of a piano is directly related to the action of a piano. The control at your finger tips to make a piano louder or softer occurs in the action. Subsequently, the design, the components and the consistency in manufacturing of the action are equally critical to the sound producing elements of the piano. Types and styles of actions are as wide spread as there are types of engines in cars. With the introduction of computer assisted design (CAD) however, piano actions have consolidated considerably over several decades. The weight and subsequent balance of piano hammers, the ratio of the whippen assembly (intricate lever system), the length of the keys, and the materials for all parts have a bearing into the overall picture of how the piano will play. Some manufacturers have incorporated the use of synthetic parts while others have held fast to more traditional components. Pictured is the side profile of a grand piano action while on the following page is an action from an upright piano.
Independent action makers:
Czech Republic: Detoa
USA: Wessel, Nickel & Gross
- Action page2
Piano Actions Continued
1. Component material, usually out of a more dense wood like maple or hornbeam. New materials such as ABS carbon fiber are also being used.
2. Action rail is the common rail that holds hammers, shanks and flanges securely in place, usually made out of extruded aluminum or dense wood such as maple or beech.
3. Action brackets – these are structural frame pieces that attach the action to the piano body. Generally more brackets are considered better for structural integrity.
4. Type of action – both “compressed” actions (miniature) and “drop” actions (for uprights shorter than 39”) have been eliminated from modern manufacturing and only “direct blow” actions remain as standard in both grand and upright pianos.
5. Action name – many manufacturers name their own actions in hopes of having a sales advantage but of greater consideration is the components.
Outsourcing of action parts has been going on for decades (almost centuries) where piano companies will build the frame, soundboard and strings and then have a piano specialist company to build actions. That said, there are many piano companies continue to build high quality actions in-house.
The piano keys are most often made out of spruce with a variety of keytop materials. In 1975, the use of elephant ivory was banned by the Convention on International Trade in Endangered Species (CITES). Since then a variety of substances have been developed for key surfaces. Most common is plastic for the use of keytops but other makers have gone to great lengths to simulate the porous feel of ivory. Names such as ivorine, ivorite, neotex, polyplex, ivoplast, and PMMA (Poly methyl methacrylate) are all used as advertising features of high grade keytops. Boutique makers attempting to remain organic also use cow bone as replacement for ivory. The black keys are manufactured out of either dense wood or plastic but some have used traditional ebony for the keytops.
The spruce keys usually are “balanced” or “weighted”. This means that lead weights have been inserted into the wood of the keys to help balance the feel of the action.
Independent piano key makers:
Germany: Kluge, Laukhuff
Modern pianos are equipped with three pedals. The right pedal is known as the sustain or damper pedal. When a note is depressed on the keyboard, the felt touching the string called the damper block is lifted up allowing the note to vibrate freely. When your finger releases the note, the damper drops down again and mutes the string. The sustain pedal lifts all the dampers simultaneously allowing the tone to continue to resound regardless of whether the note has been released at the key. The left pedal is commonly called the soft pedal. It is also referred to as the 'una corda' on grands. Grand pianos and uprights operate very differently. On a grand piano, the entire keyboard shifts from left to right making the hammers strike on 'fresh felt'. In addition, one string (una corda) is not struck by the hammers and so it becomes a quieter, more intimate tone. Due to the physical constraints of upright construction, it is not possible to have an una corda pedal. The hammers are moved closer to the strings and in essence create a sort of soft pedal because the strike point is closer. It acts more like volume limiter by reducing the amount of maximum volume achieved with a reduced strike distance. The center pedal, however has a variety of functions from sostenuto (selective sustain), bass damper (just lifting the bass dampers) or practice mute (also called attenuator pedal which drops a piece of felt in between the strings and the hammers). Some have also been set up to act as a ‘quiet play’ digital piano which blocks the hammers from striking the strings and the piano can then be used with headphones. The connecting rods and levers are called the pedal assembly or trapwork. These are made from either aluminum tubing, steel, solid brass or wood. The pedals are made from cast brass but have also been manufactured out of steel and plated with either chrome, nickel or brass.
- Design Concepts
Though not specifically mechanical in nature, there are certain design elements that re-occur in piano advertising:
1.Agraffe and Capo bar
2.Duplex or triplex (double duplex) and Aliquot
Agraffe comes from the French word “staple” meaning to fasten. On a piano, an agraffe is a small solid brass piece threaded into the cast iron plate. The strings are fed through the holes and fastened to ensure correct positioning of height and string spacing as well as establishing precise “speaking length” of the string. It is more commonly found on grand pianos than uprights. Capo D’Astro bar or simply capo bar is what is called a pressure bar and is used in place of agraffes. It is a bar made from steel and then nickel or chrome plated.
Duplex design means that there is a secondary sympathetic vibration of the string found after the bridge termination. Historically, the speaking length of any string ended after the bridge pins but in 1872, Theodore Steinway made this portion ‘live’ to resonate with the speaking length through bars called aliquots. The word aliquot means a ‘smaller portion of the whole’. Aliquot bars or aliquot strings (a 4th string on each note) excite harmonic frequencies. Today, some manufacturers have not only tuned the end part of the aliquots but also the front, making it a double duplex (also called triplex).
Hardware on a piano refers to functional or connective pieces usually made out of some sort of metal. Most of the pianos use solid brass hardware. Some have created a different look by nickel or chrome plated hardware. Hardware includes hinges, casters, pedals, screws, locks and lock plates. Brass has been the metal of choice primarily because it doesn’t readily deteriorate (tarnish or rust), is an easy metal to work with and is relatively affordable.
- Cosmetics & Styling
Understanding the outside finish of a piano requires a little knowledge of the construction process. Pianos are made from layers. The center core of body panels is known as the substrate. The lid, the rim, the side panels all have this substrate. Substrates are structural and consist quite often of layers of wood or MDF. On top of the substrate are glued the decorative pieces of wood called veneers. (see next page for more on veneers) Most popular by all piano companies is the mirror finish called polished ebony (also known as high polish ebony or "bright" ebony). Finally, the finish (also called the clear coat) seals in the wood and brings about varying degrees of luster. Sheen is determined by either hand rubbing a finish or using satin sprays. Finish can be thin and give the sensation that you feel like you’re touching the wood of the piano (also known as open-pore finish) but can also be thick like glass. Within the last 4 decades, polyester resin has become the “high shine” black that is so prevalent on most pianos. There still exist however lacquer and shellac finishes especially on custom designs and veneers. Creating the perfect “piano finish” requires great skill, tools and dust free environments. In the age of automation, many of the finishes are robotically applied.
Changing the look of a piano can be as simple as changing the legs. Replacing the standard square legs for round considerably changes the look of a piano. Over the years, furniture styles have been also applied to pianos. Most popular are Queen Anne and Louis XV or even Rococo styles. Finally, inlays of differing types of woods is also common. Walnut for example with a burled walnut inlay is popular. What appears to be trendy is high polish black with a wood inlay.
- Wood Veneers
Veneers come from many different types of trees and are cut in such a way that they display the most beautiful figure or grain of the wood. Veneers are usually only about as thick as cardboard and are used to greatly enhance the look of the piano. Common veneers are mahogany and walnut. Rosewood, macassar, and yew have become more recently in vogue. Ebony, although an actual type of wood is the term used for “black” piano finish (shown on previous page). Some companies will advertise “dark walnut” or “medium walnut” or “brown mahogany” or “red mahogany”. To enhance the grain of the wood, the wood is treated with a color layer called dye or stain. It is then covered and sealed with clear finish to enhance the grain and bring out the lustre.
- September 2017
- August 2017
- July 2017
- May 2017
- April 2017
- March 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013